Display.setting; Video Adjust - Toshiba BDX2100 Owner's Manual

Display Setting
1. Press.SETUP
[General Setting] menu.is.displayed.
2. Press  to.select.[Display Setting],
then.press...
3. Select an option, press  to.access.
... Display Setting...
TV
Video Process
Motion Video...
Use cursor key to move focus,use
"OK" key ro select
4. Press / to.select.a.setup.option.and
press ..
5. Select.the.setting.you.wish.to.change
and press OK to confirm.
-.Press  to.return.to.the.previous.
menu.
-.Press SETUP.to.exit.the.menu..
[TV]
• [TV Screen]
Select.the.screen.format.according.to.
how.you.want.the.picture.to.appear.on.
the.TV.
{16:9 Full}.–.for.a.disc.with.the.aspect.
ratio of 4:3, the output video is
stretched.into.16:9.full.screen.
{16:9 Normal}.–.for.a.disc.with.the.
aspect ratio of 4:3, the output video is
resized.vertically.to.match.what.will.be.
seen.on.the.display.
{4:3 Pan&Scan} – for standard TV,
Display.a.wide.picture.on.the.entire.
screen.and.cuts.off.the.redundant.
portions.
{4:3 Letterbox} – for standard TV,
Display.a.wide.picture.with.two.black.
borders.on.the.top.and.bottom.of.4:3.
screen.
• [Resolution]
Select.a.video.output.resolution.that.is.
compatible.with.your.TV.display.
capability.
{Auto}.–.Select.the.most.suitable.
resolution.according.to.the.TV..
{480I/576I}, {480P/576P},
{720P}, {1080I}, {1080P}.
–.Select.a.video.resolution.setting.that.
is best supported by the TV, See TV
manual.for.details.
• [TV System]
If the video does not appear correctly,
change the setting.By default, this
1
TV Screen 16:9 Full
Resolution Auto
TV System PAL
Color Space RGB
HDMI Deep color Off
SETUP Exit
setting.matches.the.most.common.
setting.for.TVs.in.your.country.
{NTSC}.–.for.NTSC-system.TV.
{PAL}.–.for.PAL-system.TV.
{Multi}.–.for.Multi-system..
TV,compatible with both PAL and NTSC.
• [Color Space]
Select a predefined Color space of
picture.
{RGB}.–.select.RGB.Color.space.
{YCbCr}.–.select.YCbCr.Color.space.
{YCbCr422}.–.Select.YCbCr422.Color.
space.
{Full RGB}.–.select.Full.RGB.Color.
space.
• [HDMI Deep Color]
This.feature.is.available.only.when.the.
display.device.is.connected.by.a.HDMI.
cable, and when it supports deep Color
feature.
{Off}.–.Output.standard.24.bit.Color.
{30 bits}.–.Output.30.bits.Color.
{36 bits}.–.Output.36.bits.Color.
• [HDMI 1080p 24F]
{On}.–.Enable.1080p.24F.video.
resolution.setting.
{Off}.–.Disable.1080p.24F.video.
resolution.setting.
About HDMI 1080p 24F Notes:
If you want the 24Hz output, it should fulfill below 3
conditions:
1.TV supports the 24Hz display:
2.Player choose the 24Hz option in the setup menu;
3.Media must be the 24Hz video.
Notes
- This resolution becomes effective only
when the playing BD-Disc contents are Film
source.
- During HDMI 1080p 24F playback, there
will be no composite output.
[Video Process]
... Display Setting...
TV

Video Adjust

Sharpness
Video Process
Motion Video...
Use cursor key to move focus,use
"OK " key ro select
• [Video Adjust]
Select a predefined setting of the video.
1..Press.OK..
2..Press/ to adjust the video
Brightness, Contrast, Hue and Saturation.
{Brightness}-.press./.to.adjust.
the brightness of display, goes left
means.dark.and.right.means.bright
More...
Low
SETUP Exit