Customizing; General.setting - Toshiba BDX2100 Owner's Manual

6 Customizing

This. section. describes. the. various. setting.
option.of.this.player..
If the setup option is grayed out, it means
the. setting. cannot. be. changed. at. the.
current.state.
General Setting
1..Press.SETUP.button.on.the.remote.
control.The.Home.Menu.appears.
... General Setting ...
System
Language
Playback
Security
Network
Use cursor key to move focus,use
"OK" key ro select
2. Press  to select an option, then press
.to.access.
3. Press / to.select.a.setup.option.and
press ..
4. Select.the.setting.you.wish.to.change
and press OK to confirm.
- Press  to.return.to.the.previous.menu.
[System]
To.change.the.following.system.option.to.
personalize.your.BD.player.
• [Screen Saver]
Turn.On.or.Off.the.screen.saver.mode.
It.helps.to.protect.the.TV.screen.
{.On.}.–.Set.the.screen.saver.active.
after.approximately.10.minutes.with.no.
operation.
-.The.BD.player.will.switch.to.standby.
mode.if.there.is.no.operation.after.the.
screen.saver.is.engaged.for.
approximately.10.minutes.
{.Off.}.–.Turn.off.the.screen.saver.
mode..
• [Disc Auto Playback]
Turn.On.or.Off.the.disc.automatic.
playback.switching.mode.
{On}.–.The.disc.playback.automatically.
after.loading.
{Off}.–.Turn.off.disc.auto.playback.
mode.
• [CEC]
This.player.supports.REGZA-LINK.which.
uses.the.HDMI.CEC.(Consumer.
Electronics.Control).protocol..You.can.
1
Screen Saver On
Disc Auto Playback On
CEC On
Disc Auto Upgrade On
Load Default More...
Exit
SETUP
use.one.single.remote.control.to.control.
all.REGZA-LINK-compliant.devices.that.
are.connected.through.HDMI.connectors.
{On}.-.Turns.on.REGZA-LINK.features.
-With CEC on, during TV standby with
the BD player on, pressing SETUP, Play/
Pause.will..power.on.the.TV.
{Off}.-.Disables.REGZA-LINK.features.
• [Disc Auto Upgrade]
Turn.On.or.Off.the.disc.automatic.
upgrade.switching.mode.
{On}.-.Start.upgrading.from.the.insert.
disc.
{Off}.-.Disable.disc.auto.upgrade.mode.
• [Load Default]
Reset.all.settings.of.BD.player.to.initial.
default.state.
-.Follow.the.instruction.on.the.TV.screen.
to confirm the default setting operation.
1..Select.Load Default.
2..A.dialogue.box.pops.up.shown.as.
below..Select.OK.
Load Default
Do you want to load default?
OK
3.It.may.take.awhile.when.loading.
default.is.in.progress..Please.wait...
Load Default
Loading default, please wait...
30%
4..TV.will.display.as.follow:
Welcome
to use BD Player Setting wizard!
Some simple settings are needed before you
enjoy it. Please make detail settings of home
menu later.
5. Press OK, enter language setting.
Press/ to.select.a.language.option.
Choose
an OSD language before starting.
The language selected will be applied not only
here but also in other OSD windows, menus etc.
Previous
Cancel
Next
OK
English
Next
OK