MSI H67A-G43 B3 Series Manual page 25

Fan Power Connectors: CPUFAN1,SYSFAN1~4
The fan power connectors support system cooling fan with +12V. When connecting
the wire to the connectors, always note that the red wire is the positive and should be
connected to the +12V; the black wire is Ground and should be connected to GND.
If the mainboard has a System Hardware Monitor chipset on-board, you must use a
specially designed fan with speed sensor to take advantage of the CPU fan control.
CPUFAN1
Important
• Please refer to the recommended CPU fans at processor's official website or consult
the vendors for proper CPU cooling fan.
• CPUFAN1 support Smart fan control. You can install Control Center utility that
will automatically control the CPUFAN1 speeds according to the actual CPUFAN1
temperatures.
Fan cooler set with 3 or 4 pins power connector are both available for CPUFAN1.
•
Front Panel Connectors: JFP1, JFP2
These connectors are for electrical connection to the front panel switches and LEDs.
The JFP1 is compliant with Intel
JFP1
SYSFAN1
Front Panel I/O Connectivity Design Guide.
®
SYSFAN2~4
JFP2
En-15