Table of Contents
Advertisement
Hardware Maintenance Manual
Replacing hardware
Removing the computer cover
To remove the computer cover:
1. Before removing any media (diskettes, CDs, or memory cards) from the
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power
4. Remove the two screws that secure the computer cover at the rear of
40
Attention
Do not remove the computer cover or attempt any repair before
reading the "Important safety information" in the Safety and Warranty
Guide that was included with your computer or in the Hardware
Maintenance Manual (HMM) for the computer. To obtain copies of the
Safety and Warranty Guide or HMM, go to the Support Web site at
http://consumersupport.lenovo.com
Note
Use only parts provided by Lenovo.
Important
Turn off the computer and wait 3 to 5 minutes to let the computer
cool before removing the computer cover.
drives, shut down your operating system, turn off all attached devices,
and the computer.
cords, input/output (I/O) cables, and any other cables that are
connected to the computer. Refer to "Locating connectors on the rear
of the computer".
the chassis.
9
Hide quick links:
Advertisement
Table of Contents
