D-Link DUB-E100 User Manual page 17

Section 3 - Troubleshooting
Linux 2.6.x
To verify if the DUB-E100 driver is properly installed:
• Load the DUB-E100 module by the following command:
[root@localhost linux2.6.14_rev101]# modprobe asix
• List the loaded modules with the specified pattern "asix":
[root@localhost linux2.6.14_rev101]# lsmod | grep asix
Then you should get the reply similar to the following lines:
asix 26880 0
usbnet 20616 1 asix
mii 9600 2 asix,e100
usbcore 114896 5 asix,usbnet,usb_storage,echi_hcd,uhci_hcd
If you still have a problem installing the D-Link DUB-E100, please contact D-Link Technical Support.
D-Link DUB-E100 User Manual 14