D-Link DUB-E100 User Manual page 14

Section 2 - Installation
8. Once you have completed the driver installation, plug the DUB E100's USB cable into an available USB port on your
computer.
9. Attach an Ethernet cable to the Ethernet port on the DUB-E100.
10. Attach the other end of the Ethernet cable to your network switch or router.
11. When the installation of the DUB-E100 is complete, the Speed LED will illuminate solid green when the DUB-E100 is
connected to a 100 Mbps network and remains off when connected to a 10 Mbps network. The Tx/Rx LED will flash
amber when data is being transmitted or received. If both LEDs are unlit, there may be a problem with the physical
connection. Check the cables between your DUB-E100 and your switch or router. Verify that your network switch or
router is powered on.
D-Link DUB-E100 User Manual 11