D-Link DUB-E100 Quick Installation Manual

Usb 2.0 fast ethernet adapter
Hide thumbs Also See for DUB-E100:

Advertisement

This product can be used with:
This product can be used with:
This product can be used with:
This product can be used with:
This product can be used with:
Windows XP, Me, 2000,
Windows XP, Me, 2000,
Windows XP, Me, 2000,
Windows XP, Me, 2000,
Windows XP, Me, 2000,
98 Second Edition
98 Second Edition
98 Second Edition
98 Second Edition
98 Second Edition

Before You Begin

You must have at least the following:
Windows XP/Me/2000/98 Second Edition
One Available USB Port
CD-ROM Drive
Check Your Package Contents
These are the items included with your purchase:
If any of the below items are missing, please contact your reseller.
• DUB-E100 USB 2.0 Fast Ethernet Adapter
• Drivers on CD-ROM
1
DUB-E100
DUB-E100
DUB-E100
DUB-E100
DUB-E100
D-Link USB 2.0 Fast
Ethernet Adapter

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DUB-E100

  • Page 1: Before You Begin

    CD-ROM Drive Check Your Package Contents These are the items included with your purchase: If any of the below items are missing, please contact your reseller. • DUB-E100 USB 2.0 Fast Ethernet Adapter • Drivers on CD-ROM DUB-E100 DUB-E100 DUB-E100...
  • Page 2: System Requirements

    Attach the other end of the CAT5 Ethernet cable to a switch, hub, or router/gate- way. Your computer should automatically detect the DUB-E100 and prompt you to install the driver. Please proceed to the next section to complete the driver installation.
  • Page 3 Completing The Driver Installation Windows XP & Me Users Note: Windows Me Screens will vary slightly from the Windows XP screens shown. Click Next Click Continue Anyway Click Finish Windows Me users may be asked to restart the computer. Select “Yes”...
  • Page 4: Windows 2000 Users

    Completing The Driver Installation Windows 2000 Users Click Next Click Next Make sure to check ONLY the CD-ROM drives box and uncheck all other boxes. Click Next...
  • Page 5 Completing The Driver Installation Windows 2000 Users Click Next Click Click Finish You may be asked to restart your computer. Select Yes to restart your computer and complete the installation.
  • Page 6: Windows 98Se Users

    Completing The Driver Installation Windows 98SE Users Click Next Click Next Click Next...
  • Page 7 Completing The Driver Installation Windows 98SE Users Click Next Note: You may see these next 2 screens. Click Next Type in g:\win98 (use the appropriate letter corre- sponding to your CD-ROM drive) then Click OK. Click Finish Click...
  • Page 8 DUB- E100, your computer, and your network. Tips You can verify that the DUB-E100 is installed properly by using the follow- ing steps. • Right click on My Computer and select Properties.
  • Page 9: Technical Support

    Monday to Friday 8:30am to 9:00pm EST D-Link Technical Support over the Internet: http://support.dlink.ca email:support@dlink.ca ©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DUB-E100.030603...

Table of Contents