9.14 Developer options
You can set the USB debugging mode, select screen stay awake while charging and so on. And you can
also manage user interface and apps.
USB debugging: Check to permit debugging tools on a computer to communicate with your MultiPad via
a USB connection.
Stay awake: Check to prevent the screen from dimming and locking when the MultiPad is connected to a
charger or to a USB device that provides power. Don't use this setting with a static image on the
MultiPad for long periods of time, or the screen may be marked with that image.
Allow mock locations: Check to permit a development tool on a computer to control where the
MultiPad believes it is located, rather than using the internal methods for this purpose.
USER MANUAL | MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo)
51