Sennheiser evolution wireless G3 EW 100-935 G3-B-X Instruction Manual page 19

Hide thumbs Also See for evolution wireless G3 EW 100-935 G3-B-X:
Table of Contents

Advertisement

Using the devices
18
To
completely
switch the receiver off:
Disconnect the receiver from the mains by unplugging the mains unit from the wall
socket.
SK 100 bodypack transmitter
¸
To switch the bodypack transmitter
¸
Push the two catches
Briefly press the
ON/OFF
The bodypack transmitter transmits an RF signal. The transmission icon
displayed.
The red
ON
LED
on the display panel.
You can switch the bodypack transmitter on and
For more information, see below.
To switch the bodypack transmitter off:
If necessary, deactivate the lock mode (see page 21).
Press the
ON/OFF
ON/OFF
¿
ON
LED
goes off and the display panel turns off.
When in the operating menu, pressing the
(ESC function) and return you to the current standard display.
To switch the bodypack transmitter
operation):
Press the
ON/OFF
ON/OFF
Press the
SET
SET
The transmission frequency is displayed but the bodypack transmitter does not
transmit an RF signal. The transmission icon
¸
µ
on
(online operation):
and open the battery compartment cover µ.
ON/OFF
button
.
¿
lights up and the standard display "Frequency/Name" appears
button
until "OFF" appears on the display panel. The red
ON/OFF
on
and to
deactivate the RF signal on switch-on
button
until
"RF Mute
button ¶.
¿
deactivate the RF signal on
switch-on.
button
will cancel your entry
On?" appears on the display panel.
is not displayed.
is
(offline

Advertisement

Table of Contents
loading

Table of Contents