SPECIFICATIONS Model: DUB185 DUB186 Capacities Air volume 0 - 3.2 m /min Air speed (average) 0 - 81 m/s 0 - 56 m/s Air speed (max.) 0 - 98 m/s 0 - 68 m/s Overall length 517 mm *1 861 mm *2 Rated voltage D.C.
Model DUB186 SAFETY WARNINGS Sound pressure level (L ) : 82.5 dB(A) Uncertainty (K) : 2.3 dB(A) Sound power level (L ) : 92.4 dB (A) General power tool safety warnings Uncertainty (K) : 2.8 dB(A) NOTE: The declared noise emission value(s) has been WARNING: Read all safety warnings, instruc- measured in accordance with a standard test method...
Page 4
Prevent unintentional starting. Ensure the Store idle power tools out of the reach of children and switch is in the off-position before connecting do not allow persons unfamiliar with the power tool to power source and/or battery pack, picking or these instructions to operate the power tool. Power up or carrying the tool.
Page 5
If the machine is damaged, ask Makita Authorized Service Centers for repair. 16. Do not insert fingers or other objects into suction inlet or blower outlet.
Page 6
Store the machine in a dry place out of the Service reach of children. Have your power tool serviced by a qualified repair When you stop the machine for inspection, ser- person using only identical replacement parts. This vicing, storage, or changing accessory, switch will ensure that the safety of the power tool is maintained.
Page 7
Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. Tips for maintaining maximum battery life Charge the battery cartridge before completely dis- charged.
Installing or removing the dust bag FUNCTIONAL Optional accessory for DUB185 / DUB186 DESCRIPTION Align the protrusions on the joint of dust bag with the grooves on the main unit, then insert the joint into the main unit, and then turn it to lock it into place. CAUTION: Always be sure that the machine is switched off and the battery cartridge is removed...
Page 9
Indicating the remaining battery Machine/battery protection system capacity The machine is equipped with a machine/battery protection system. This system automatically cuts off Only for battery cartridges with the indicator power to the motor to extend machine and battery life. The machine will automatically stop during operation if the machine or battery is placed under one of the fol- lowing conditions: Overload protection...
For DUB185 Speed adjusting dial For DUB186 ► 1. Speed adjusting dial The speed can be changed by turning the speed adjusting dial to a given number setting from 1 to 3. Higher speed is obtained when the dial is turned in the direction of number 3. And lower speed is obtained when it is turned in the direction of number 1.
Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual, do not attempt to dismantle the machine. Instead, ask Makita Authorized Service Centers, always using Makita replacement parts for repairs.
OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita prod- uct specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
Need help?
Do you have a question about the DUB185F001 and is the answer not in the manual?
Questions and answers