Table of Contents
Advertisement
2.3 Startup/Termination
The following describes the procedures for startup and termination.
To operate the IE-70000-MC-NW-A, a dedicated debugger is required. For details, refer to the ID850NWC
Integrated Debugger Ver.2.51 or Later Operation (Windows Based) User's Manual (U16525E).
(1) Startup procedure
<1> Apply power to the host machine and start the OS.
Install the integrated debugger, device file, and driver, if they have not been installed. (See APPENDIX
A for the installation procedure of the driver, and the ID850NWC Integrated Debugger Ver. 2.51 or
Later Operation (Windows Based) User's Manual (U16525E) for the installation procedure of the
integrated debugger and device file.)
<2> Apply power to the target system.
<3> Start the integrated debugger.
<4> If the target device includes internal ROM/flash memory, flash security ID code authentication must be
performed in the integrated debugger. (See APPENDIX C for details of the ID code.)
(2) Termination procedure
<1> Terminate the debugger.
<2> Shutdown the power to the target system.
<3> Shutdown the OS in the host machine and shutdown the power to the host machine.
CHAPTER 2 NAMES AND FUNCTIONS OF COMPONENTS
User's Manual U16647EJ1V0UM
21
Advertisement
Table of Contents
