Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Duratool D03214
Summary of Contents for Duratool D03214
- Page 1 18V Cordless Hammer Drill Model: D03214...
- Page 2 GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings and all instructions and keep for future reference. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. The term “power tool” in the warnings refers to your battery-operated (cordless) power tool. 1) Work area safety •...
- Page 3 • Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. • If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
- Page 4 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES & CHARGERS Batteries • Never attempt to open for any reason. • Do not store in locations where the temperature may exceed 40°C. • Charge only at ambient temperatures between 4°C and 40°C. • Charge only using the charger provided with the tool. •...
- Page 5 CHARGING THE BATTERY PACK Note: Batteries will not reach full charge the first time they are charged. Allow several cycles (working followed by recharging) for the item to fully charge. The battery should only be used indoors. • After normal usage, about one hour of charging time is required for the battery to be fully charged.
- Page 6 SWITCH • To start the drill, press the switch trigger. • Release the switch trigger to turn the drill off. Switch Lock • The switch trigger can be locked in the OFF position. • To lock the switch trigger, place the direction of rotation selector in the centre position.
- Page 7 ADJUSTING THE TORQUE • The torque is adjusted by rotating the torque setting. The torque is greater when the torque setting is set on a higher position and less when set on a low position. Note: “1” denotes the lowest and “ ” the highest. •...
- Page 8 CLEANING • Always remove the battery before cleaning. • Remove dust and dirt with a cloth, slightly dampened with a mild detergent. • Do not use any chemicals, abrasives or solvents that could damage the tool. • Clean any swarf and dust out of the chuck regularly. •...
Need help?
Do you have a question about the D03214 and is the answer not in the manual?
Questions and answers