Table of Contents
Advertisement
4 Installation
4.2
Mounting the indoor unit
4.2.1
To install the indoor unit
1 Put the installation pattern (see box) on the wall and follow the
steps as shown below.
1
2 Fix the wall bracket to the wall with 2 M8 bolts.
3 Lift the unit.
30kg
4 Tilt the top of the unit against the wall at the position of the wall
bracket.
5 Slide the bracket on the back of the unit over the wall bracket.
Make sure the unit is fixed properly. You can additionally fix the
bottom side of the unit with 2 M8 bolts.
6 The unit is mounted to the wall.
Installation manual
6
2
3
2x
4.3
Connecting the refrigerant piping
See the outdoor unit installation manual for all guidelines,
specifications and installation instructions.
4.3.1
To connect the refrigerant piping to the
indoor unit
1 Connect the liquid stop valve from the outdoor unit to the
refrigerant liquid connection of the indoor unit.
a
Refrigerant liquid connection
a
Refrigerant gas connection
b
2 Connect the gas stop valve from the outdoor unit to the
refrigerant gas connection of the indoor unit.
b
RHYHBH05AAV3 + RHYHBH/X08AAV3
ROTEX HPU hybrid heat pump module
4P353065-1 – 2013.05
Advertisement
Table of Contents
