Y-1 Volume adjustment Knob
Y-2 Bass adjustment Knob
Y-3 Connect to computer Audio-out
1.4 Notes on computer cabling and installation
C-1
C-1 Monitor power cord
C-3 Speaker audio signal cable
1. Connect the monitor signal cable to the on-board graphics card connector if the
model you purchased is not equipped with an external graphics card.
2. If there is an external graphics card, connect the monitor signal cable to the
VGA or DVI connector on the external graphics card.
3. If both your computer and monitor have a DVI connector, you can connect the
computer to the monitor through your own DVI data cable.
4. If there is only a DVI connector on the external graphics card and the monitor
only has a VGA connector, the two can be connected with a DVI-VGA converter.
5. Screw the WiFi antenna on the WiFi card connector if the model you purchased
is equipped with the WiFi card.
31035995_IdeaCentre K UG_EN_V3.0.indd 7
Y-4 Speaker Power Switch
Y-5 Speaker DC IN
Y-6 Primary and secondary speaker
cables
C-2
C-4
C-2 Monitor data cable
C-4 WiFi antenna
C-3
7
User Guide
2008.10.20 2:11:21 PM