Notes On Computer Cabling And Installation; Keyboard And Mouse - Lenovo IdeaCentre Q200 User Manual

1.3 Notes on computer cabling and installation

1. Connect the monitor signal cable to the on-board graphics card connector if the
model you purchased is not equipped with an external graphics card.
2. If there is an external graphics card, connect the monitor signal cable to the
VGA or DVI connector in the external graphics card.
3. If both your computer and monitor have the DVI connector, you can connect the
computer to the monitor through your own DVI data cable.
4. If there is only DVI connector in the external graphics card and the monitor only
have the VGA connector, connect the monitor data cable and DVI connector by
the DVI-VGA converter
Notes:
• Keep speakers away from the monitor to avoid magnetic interference.
• Ensure the monitor-to-computer cable connections are secure, with screws
tightened.
• Connect the monitor signal cable to the on-board graphics card connector if
the model you purchased is not equipped with an external graphics card.

1.4 Keyboard and Mouse

This computer adopts wireless keyboard and mouse. The wireless keyboard and
mouse of this computer adopt advanced wireless connection technology instead
of the traditional wire devices. The data may be transmitted between the keyboard,
mouse and the computer in effective distance through wireless signals, which
enables free selection of space.
L V T
+ -
× -
— Opens the LVT navigation menu
31032755_IdeaCentre Q-UG.indd 7
7
User Guide
2007.12.21 2:28:21 PM