Product Description; Befor First Use - Klarstein BAROSSA 40D Manual

EN
18

PRODUCT DESCRIPTION

1 Control Panel
2 Handle
3 Adjustable foot
4 Hinge cover
5 Wood shelf
6 Bottom wood shelf

BEFOR FIRST USE

Before installation
Before connecting the wine cooler to the power source, let it stand upright for
approximately 4 hours. This will reduce the possibility of a malfunction in the cooling
system from improper handling during transportation. Clean the interior surface with
lukewarm water using a soft cloth (see Maintenance and Cleaning).
Installation
• This wine cooler is designed to be free standing only, and should not be recessed or
built-in.
• Allow 5 inches of space between the back and sides of the wine cooler, which
allows the proper air venti- lation. Adjust the feet to keep the wine cooler level.
Locate the wine cooler away from direct sunlight and sources of heat (stove, heater,
radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may
increase electrical consumption. Ambient temperature below 5°C or above 32°C
will hinder the perfor- mance of this appliance.
• Depending on the location of the appliance, the direction of the door opens can be
changed.