Filling The Solution Tank - Bissell SPOTCLEAN 5207 Series User Manual

Filling the Solution Tank

1
Remove the tank by lifting it straight
up and away from the unit.
3
Add water to the indicated fill line on
the solution tank.
NOTE: Follow the fill lines on your clean tank to add the correct amount of hot
tap water (140 degrees F)/ 60 degrees C) MAX) and portable machine formula.
Note: There are different directions on the tank for small and large messes.
DO NOT BOIL OR MICROWAVE WATER.
5
Replace the plug by rotating into place
and pressing gently onto tank.
2
Pull black tab to reveal tank opening. The
plug rotates out of the way for easy filling.
4
FORMULA
Add formula to the indicated fill line
on the solution tank. Add 1 ounce of
any BISSELL boost, if desired.
6
Replace tank by lining the tank bottom
with indentations on machine. Press
down firmly on tank to secure in position.
BOOST
www.BISSELL.com
7