Wolf SO30PE/S/PH Use And Care Manual page 11

O VEN O P E RAT I ON
Proof
Setting controls:
Touch PROOF.
1
Oven temperature is preset to 85°F
2
to select preset temperature or use number pads to
change temperature up to 110°F
Touch ENTER.
3
Dehydration
Accessory kit required. Accessories are avail able through an
authorized Wolf dealer. For local dealer information, visit the
find a showroom section of our website, wolfappliance.com.
Setting controls:
Touch DEHYD.
1
Oven temperature is preset to 135°F
2
ENTER to select preset temperature or use number pads
to change temperature between 110°F
.
(70°C)
Touch ENTER.
3
. Touch ENTER
(30°C)
.
(45°C)
. Touch
(60°C)
and 160°F
(45°C)
Temperature Probe
Use only the temperature probe shipped with this appliance.
Refer to the illustration below. The temperature probe mea-
sures the internal temperature of food while cooking. It can
be used with all cooking modes except broil and convection
broil.
Setting controls:
Touch desired cooking mode.
1
Touch ENTER to select preset temperature or use
2
number pads to change temperature, then touch ENTER.
Insert probe into the thickest area of food. When making
3
bread, cook for approximately 10 minutes before
inserting probe.
When preheat is complete, use a pot holder to lift probe
4
receptacle cover, then insert connector. Refer to the
illustration below.
Touch TEMP PROBE. Use number pads to select tem-
5
perature, then touch ENTER. Probe temperature appears
on the display until setpoint is reached.
An audible chime indicates internal temperature has
6
reached probe setpoint. Remove, then reinsert probe to
verify internal temperature.
CAUTION
Probe and probe receptacle will be very hot. Handle
with care.
Temperature probe Probe receptacle
|
wolfappliance.com 11