Sanyo VSP-8500 Instruction Manual page 43

SHIFT+ ESC TO EXIT:
This function displays the camera menu.
Press the SHIFT and ESC buttons at the
same time to exit the menu (only
possible on models VCC-9500, 9600,
9700, and 9800).
AUXILIARY CONTACT:
This button turns the other functions ON.
When the button is pressed again, AUX
turns OFF. Enter the numbers while the
AUX is ON or OFF and press the
ENTER button. Press the ESC button to
return to the initial display. (Refer to the
Sanyo camera AUX command table.
P52)
AUXILIARY CONTACT
AUX ON : –
(1-16)
Press ESC to return
c
GO TO PRESET 1:
Moves the camera to the preset 1 (initial
values).
GO TO PRESET:
Press the button, enter the preset
number, and press the ENTER button to
move the camera to the selected
position. Press the ESC button to return
to the initial display.
GO TO PRESET
POSITION: –
(1-255)
Press ESC to return
c
IRIS CENTER:
The iris level is returned to the center
position.
c
AUTO FOCUS ON:
If the image is out of focus, press the
button for one-touch focus.
AUTO PAN START:
This function starts the auto pan. The
auto pan stops when another operation
is started.
c
SEQUENCE START:
The sequential pan automatically starts
using a preset position. The sequential
pan stops when another operation is
started.
c
Camera operation
c
TOUR START:
This function starts the tour operation.
The tour stops when another operation is
started.
PRESET MEMORY:
Press this button after selecting a preset
object. Enter the preset number from the
displayed menu and press the ENTER
button.
MEMORY PRESET
POSITION: –
(1-255)
Press ESC to return
c
ZOOM BACK:
The zoom moves to the maximum Tele
position and returns to the position
where the zoom started.
c
MAX. ZOOM:
Zooms to the maximum Tele position.
c
FOCUS NEAR/FAR:
• FOCUS NEAR:
Focuses on a near object.
• FOCUS FAR:
Focuses on a far object.
c
IRIS OPEN/CLOSE:
• IRIS OPEN:
Opens the iris level.
• IRIS CLOSE:
Closes the iris level.
Operation
42