Related Manuals for PoeWit WAP-2E
Summary of Contents for PoeWit WAP-2E
- Page 1 QUICK START GUIDE WAP-1 / WAP-2 / WAP-2E / WAP-2O CLOUD-INTELLIGENT, ENTERPRISE-CLASS WIRELESS ACCESS POINTS poewit.com...
- Page 2 PoE Switch. • IMPORTANT: To achieve full power and wireless transmission: • Power the WAP-2 and WAP-2E with 802.3at (PoE+) • Power the WAP-1 and WAP-2O with 802.3bt (PoE++) 2) Once the AP is receiving power, it will automatically connect to the internet, and its LAN1 LED will appear as follows: •...
- Page 3 • Blue LED: - Solid: WLAN enabled - Blinking: WLAN Receiving/Transmitting • Green/Blue Alt. LED: LAN1 and WLAN Receiving/Transmitting • WAP-2E: • Green LAN1 LED: - Solid: Good link @ 2.5Gbps - Blinking: Receiving/Transmitting @ 2.5Gbps • Amber LAN1 LED:...
- Page 4 INSTALLATION AND SETUP 3) To configure the device, download the PoEWit App from Google Play or the Apple App Store. • NOTE: The AP and the mobile device running the PoEWit App must be on the same external IP address and the same local subnet.
- Page 5 WelcomeGuest poewitguest_5.0G WelcomeGuest 2. Open the PoEWit App to discover and configure the new AP. 3. Once the settings are saved, the AP will reboot and lose connection to the mobile device. Allow 30 to 60 seconds for the AP to reestablish power.
- Page 6 INSTALLATION AND SETUP poewit.com PoEWit Technologies Inc. All Rights Reserved 2023.
Need help?
Do you have a question about the WAP-2E and is the answer not in the manual?
Questions and answers