Subscribe to Our Youtube Channel
Related Manuals for PoeWit WAP-1
Summary of Contents for PoeWit WAP-1
- Page 1 QUICK START GUIDE WAP-1 / WAP-2 / WAP-2O CLOUD-INTELLIGENT, ENTERPRISE-CLASS WIRELESS ACCESS POINT poewit.com...
- Page 2 • IMPORTANT: To achieve full power and wireless transmission: • Power the WAP-2 with 802.3at (PoE+) • Power the WAP-1 and WAP-2O with 802.3bt (PoE++) 2) Once the AP is receiving power, it will automatically connect to the internet, and its LAN1 LEDs will appear as follows: •...
- Page 3 • NOTE: Full scope of LED definitions can be found on the product Data Sheet. 3) To configure the device, download the PoEWit App from Google Play or the Apple App Store. • NOTE: The AP and the mobile device running the PoEWit App must be on the same external IP address and the same local subnet.
- Page 4 4a) With an Existing AP on the Network: 1. Connect to the existing AP using your mobile device. 2. Open the PoEWit App to discover and configure the new AP. 4b) With No Existing AP on the Network: 1. Connect to the newly-installed AP using the default SSID and Passcode.
- Page 5 INSTALLATION AND SETUP 2. Open the PoEWit App to discover and configure the new AP. 3. Once the settings are saved, the AP will reboot and lose connection to the mobile device. Allow 30 to 60 seconds for the AP to reestablish power.
Need help?
Do you have a question about the WAP-1 and is the answer not in the manual?
Questions and answers