Subscribe to Our Youtube Channel
Related Manuals for PoeWit WAP-1
Summary of Contents for PoeWit WAP-1
- Page 1 QUICK START GUIDE WAP-1 CLOUD-INTELLIGENT WI-FI 6 WIRELESS ACCESS POINT WITH 8X8 Enterprise-Class | Ultra-High-Density poewit.com...
- Page 2 IS AN AIR GAP BETWEEN THE BACK OF THE AP HOUSING AND THE MOUNTING SURFACE. AIR FLOW IS IMPORTANT TO MAINTAINING A LOW TEMPERATURE. 1) After mounting the WAP-1, connect an Ethernet cable (Cat5/6) from the LAN1 port to the Router. • Note: To achieve full power and wireless transmission, ensure the PoE source is 802.3bt.
- Page 3 INSTALLATION AND SETUP • Note: The WAP-1 and the mobile device running the PoEWit App must be on the same external IP address and the same local subnet. 3) Once powered On, the WAP-1 will automatically connect to the internet, and the Power LED will appear blue when the device is ready for operation.
- Page 4 SSID Passcode poewit_2.4G_1 3301Andrews poewit_5.0G_1 3301Andrews poewitguest_2.4G WelcomeGuest poewitguest_5.0G WelcomeGuest 2. Open the PoEWit App to discover and configure the new WAP-1. 3. Once the settings are saved, the WAP-1 will reboot and lose connection to the mobile device. Allow 30 to 60 seconds for the WAP-1 to reestablish power. poewit.com...
- Page 5 INSTALLATION AND SETUP 4. Once power is restored, connect to the new SSID you setup. poewit.com...
Need help?
Do you have a question about the WAP-1 and is the answer not in the manual?
Questions and answers