Table of Contents
Advertisement
Gaming
1.
Press the MENU key to open the OSD.
2.
Using the Navi/OK button, select Gaming from the OSD. Then navigate to the setting you wish to adjust.
3.
Use the Navi/OK button to adjust any sliding scales.
4.
Over Drive: Select Off, Normal, or Extreme.
5.
Over Clock (selective models): The monitor can be over-clocked to a higher refresh rate than advertised by the panel
specification.
*This function allows you to reset the maximum refresh rate in the NVIDIA Control Panel after rebooting. If nothing is
displayed, disconnect the DisplayPort cable and use the monitor's on-screen display to select a default refresh rate.
IMPORTANT: Overclocking may result in flicker or other adverse effects that may derive from the total configuration of the
system connected to the display, and possibly, in addition, the display's panel specifications. It may be possible to
resolve or reduce such effects by setting a lower refresh rate.
6.
Aim point: Show an Aim point on the screen for shooting games.
OSD
1.
Press the MENU key to open the OSD.
2.
Using the Navi/OK button, select OSD from the OSD. Then navigate to the setting you wish to adjust.
3.
Use the Navi/OK button to adjust any sliding scales.
4.
Language: Set the OSD menu language.
5.
OSD timeout: Adjust the delay before turning off the OSD menu.
6.
Transparency: Select the transparency when using gaming mode. The transparency can be 0% (OFF), 20%, 40%, 60%, or 80%.
7.
Refresh rate num: Display the panel's current refresh rate on the screen.
8.
OSD Lock: OSD Lock function is used to prevent OSD button from being pressed accidentally. To remove the OSD Lock
message, press and hold the Navi/OK button continuously for 3 seconds until the message disappears. If the OSD Lock message
remains, please check whether the Navi/OK button is stuck.
Advertisement
Table of Contents
