Pump Performance - Graco E-Flo SP EC100CS2 Installation-Parts

Pump Performance

Calculate Fluid Outlet Pressure
To calculate fluid outlet pressure (psi/MPa/bar) at a spe-
cific fluid flow (gpm/lpm) and electrical power (W), use
the following instructions and pump data chart.
1. Refer to the desired flow along the bottom of the
chart.
2. Follow the vertical line up to the intersection with the
selected fluid outlet pressure curve. Follow left to
the scale to read the fluid out pressure.
1800
1600
1400
1200
1000
800
600
400
200
0
0
F . 34: E-Flow SP Performance Chart
IG
NOTE: Performance is measured using 10 weight oil.
3A6586A
E-Flo SP with Dura-Flo 430 Lower
1500 3000
Performance E-Flo SP with Dura-Flo 430 Lower.xlsx Chart2 12/21/2018 11:12 AM
Calculate Electrical Power
To calculate electrical power (W) at a specific fluid flow
(gpm/lpm), use the following instructions and pump data
chart.
1. Refer to the desired flow along the bottom of the
chart.
2. Follow the vertical line up to the intersection with the
selected electrical power curve. Follow right to the
scale to read the fluid out pressure.
Pressure (psig)
Pressure (psig)
Power (W)
Power (W)
4500 6000
Flow (cc/min)
Pressure (psig)
Pressure (psig)
Power (W)
Power (W)
7500 9000
Pump Performance
2700
2400
2100
1800
1500
1200
900
600
300
0
10500
37