Turning On This Unit; Opening The Terminal Cover (Sd Card Cover) - JVC Everio GZ-R300 Detailed User Manual

Turning on this Unit

Open the LCD monitor to turn on this unit.
To turn off the power, close the LCD monitor.
To turn on the power
o
Open the LCD monitor.
.
To turn off the power
o
Close the LCD monitor.
.
The POWER/ACCESS lamp goes off and the power is turned off.
"POWER/ACCESS (Power/Access) Lamp" (A p. 117)

Opening the Terminal Cover (SD Card Cover)

To open
o
.
A Open the LCD monitor.
B Slide down the cover lock and slide the cover aside.
C Lift the cover slowly.
To close
o
.
Leave the LCD monitor open first.
A Flip down the cover slowly while making sure the gray waterproof seal
fits into the opening at the terminals.
B Press the entire cover against the camcorder with equal force and firmly
attach the cover completely.
C Slide the cover until it clicks into place.
The cover is not properly closed if the red mark on the cover lock is visible.
Caution :
Ensure that the terminal cover and the gray waterproof seal are not
0
damaged and that there are no foreign materials (such as hair, lint, sand
or dust) adhered on the cover.
Stop using the unit underwater if there are damages to the cover, etc. and
0
consult your JVC dealer or the nearest JVC service center.
Do not apply excessive force when opening/closing the terminal cover.
0
Read the "Cautions on Using Underwater" (A p. 7) before using the
0
camera underwater or in places exposed to water droplets.
Getting Started
5