Control Panel - Zanussi ZWH 8100 SE User Manual

Control panel

Below is a picture of the control panel. It shows the programme selector dial as well as the
buttons and the pilot lights. These are presented by relevant numbers on the following pages.
1
Programme selector dial
1
TEMPERATURE button
2
SPIN reduction button
3
EASY IRON button
4
EXTRA RINSE button
5
DELAY START button
6
Display
7
START/PAUSE button
8
TIME MANAGER buttons
9
Programme Selector Dial
It allows you to switch the appliance on/off and/
or to select a programme.
Temperature
This button allows you to increase or decrease
the washing temperature.
Spin Reduction
By pressing this button you can change the
spin speed of the selected programme.
Available options:
No spin
By selecting this option, all spinning phases are
suppressed and replaced by a drain, so as not
to wrinkle the laundry. Recommended for ex-
tremely delicate fabrics. On some programmes
the rinses will be performed with more water.
www.zanussi.com
2 3 4 5
Rinse hold
By selecting this function the water of the last
rinse is not emptied out to prevent the fabrics
from creasing. Before opening the door it will
be necessary to empty out the water. To empty
out the water, please read the paragraph «At
the end of the programme».
Easy Iron
By selecting this option the laundry is gently
washed and spun to avoid any creasing. In this
way ironing is easier. Furthermore the machine
will perform some additional rinses in some
programmes. On cotton programmes the maxi-
mum spin speed is reduced automatically.
Extra Rinse
This appliance is designed to save energy. If it
necessary to rinse the laundry using an extra
quantity of water (extra rinse), select this option.
Some additional rinses will be performed. This
option is recommended for people who are al-
lergic to detergents, and in areas where the
water is very soft.
Delay Start
The programme can be delayed from 30 min -
60 min - 90 min, 2 hours and then by 1 hour up
to a maximum of 20 hours by means of this but-
ton.
6 7 8 9
5