Table of Contents
Advertisement
en Time-setting options
Notes
¡ The display for the cooking zone on which the cook-
ware is located lights up brighter.
¡ The
display lights up in the display for the cooking
zone that is still selected.
11.3 Changing the power level
1.
Select one of the two move cooking zones.
12 Time-setting options
Your hob has various functions for setting the cooking
time:
¡ Setting the cooking time
¡ Automatically programming the cooking time
¡ Timer
12.1 Setting the time
The cooking zone switches off automatically once the
time that is set has elapsed. You can set a cooking
time of up to 99 minutes.
Programming the cooking time
Select the cooking zone and the power level.
1.
Touch
.
2.
a The
display lights up in the cooking zone.
lights up in the timer display.
a
Within the next 10 seconds, set the required cook-
3.
ing time in the settings range.
To set a cooking time of less than 10 minutes,
‒
always touch 0 before you select the required
value.
a The time starts to elapse.
Notes
¡ To view the remaining cooking time, select the cor-
responding cooking zone.
¡ If you have set a cooking time for several cooking
zones, the time information for each of the selected
cooking zones always appears in the timer display.
¡ If you select the CombiZone function for the com-
bined cooking zone, the set time for both cooking
zones is the same.
20
Change the power level in the settings area.
2.
a If you deactivate the function, the power levels re-
turn to the preset values.
11.4 Deactivating the move function
Touch
.
▶
a The move function has now been deactivated.
Note: You you set the power level for one of the cook-
ing zones to , the function is deactivated within ap-
prox. 10 seconds.
Changing or deleting the cooking time
Select the cooking zone and then touch
1.
To delete the time, change the cooking time in the
2.
settings range or set to
Once the cooking time has elapsed
The cooking zone switches itself off. An audible signal
sounds and the
appears in the timer display for
10 seconds.
Touch
.
▶
a The displays go out and the audible signal stops.
12.2 Automatically programming the
cooking time
You can automatically set the same cooking time for all
cooking zones. The set time for each of the cooking
zones counts down independently of the others.
You can find more information about this at
→ "Basic settings", Page 22.
12.3 Short-term timer
You can use the short-term timer to set a time of up to
99 minutes. This function operates independently of the
cooking zones and other settings. This function does
not automatically switch off a cooking zone.
Setting the short-term timer
Touch
repeatedly until the
1.
lights up in the timer display.
a
Set the desired time in the settings range.
2.
a After a few seconds, the time begins to elapse.
Changing or deleting the timer duration
Touch
repeatedly until the
1.
In the settings range, change the time or set to
2.
to delete the time.
Once the timer duration has elapsed
A signal sounds.
appears in the timer display and
the display lights up. The displays go out after
10 seconds.
Touch
.
▶
a The displays go out and the audible signal stops.
.
.
display lights up.
display lights up.
Advertisement
Table of Contents
