Volvo V90 Owner's Manual page 669

Replacing windscreen wiper blades
The wiper blades sweep water away from the
windscreen and rear window. Together with the
washer fluid they clean the windows and ensure
visibility for driving. Windscreen and rear window
wiper blades can be replaced.
Replacing a windscreen wiper blade
Fold up the wiper arm when it is in service
position. Service position is activated/deacti-
vated via the function view in the centre dis-
play when the car is stationary and the wind-
screen wipers are not on. Press the button
located on the wiper blade mounting and pull
straight out parallel with the wiper arm.
Slide in the new wiper blade until a "click" is
heard.
3. Check that the blade is firmly installed.
4. Fold the wiper arm back towards the wind-
screen.
The wiper blades are different lengths
MAINTENANCE AND SERVICE
NOTE
When replacing the wiper blades, note that
they have different lengths. The blade on the
driver's side is longer than on the passenger
side.
Related information
Using the rain sensor (p. 171)
•
Using windscreen and headlamp washers
•
(p. 173)
Using automatic rear windscreen wiping
•
when reversing (p. 175)
Using the rain sensor's memory function
•
(p. 172)
Using the rear window wiper and washer
•
(p. 174)
Filling washer fluid (p. 669)
•
Wiper blades in service position (p. 668)
•
Replacing the wiper blade, rear window
•
(p. 666)
Using windscreen wipers (p. 170)
•
Wiper blades and washer fluid (p. 170)
•
667