Volvo V90 Owner's Manual page 617

Twin engine
Hide thumbs Also See for V90:
Table of Contents

Advertisement

WARNING
Loads in the luggage compartment must be
anchored well, and also using a correctly fit-
ted safety net.
Fitting the safety net
Rear fitting
1. If necessary, fold the rear seat backrests for-
ward in order to facilitate installation.
2. Lower the safety net cassette's end pieces
over the mounting eyelets in the recess of
the side panels. Press down the end piece
one side at a time. Check that the cassette is
properly secured.
3. Pull up the net.
4. Hook one of the safety net's retaining hooks
into the rear roof mounting and then press it
forward to the end position.
5. Hook the other of the safety net's retaining
hooks on the opposite side and press it for-
ward to the end position.
Front fitting
1. Fold the rear seat's backrest forward.
2. Align the safety net cassette's anchor rails in
front of the backrest's attachment lugs.
3. Slide the cassette into the attachment lugs.
4. Pull up the net.
5. Hook one of the safety net's retaining hooks
into the front roof mounting and then press it
forward to the end position.
LOADING, STORAGE AND PASSENGER COMPARTMENT
6. Hook the other of the safety net's retaining
hooks on the opposite side and press it for-
ward to the end position.
Removing the safety net
1. Undo the safety net from the roof mountings
by pressing the retaining hooks backwards.
Allow the net to roll into the cassette.
2.
Rear fitting:
Press the button on each side of the cas-
sette in order to release the end pieces from
the mounting eyelets. Lift out the safety net.
Front fitting:
Slide the cassette from the attachment lugs
and lift out the safety net.
Related information
Recommendations for loading (p. 607)
Load retaining eyelets (p. 610)
615

Advertisement

Table of Contents
loading

Table of Contents