Gigabyte H253-Z10-AAP1 User Manual page 119

5-3-4-1 SMU Common Options
Parameter
SMU Common Options
TDP Control
PPT Control
Determinism Control
xGMI Link Width Control
APBDIS
DfPstate Range Support
Power Profile Selection
BoostFmaxEn
DF PState Frequency
Optimizer
DF PState Latency
Optimizer
DF Cstates
Description
Options available: Manual, Auto. Default setting is Auto.
Options available: Manual, Auto. Default setting is Auto.
Selects use the fused Determinism or set customized Determinism.
Options available: Manual, Auto. Default setting is Auto.
Options available: Manual, Auto. Default setting is Auto.
Options available: 0, 1, Auto. Default setting is Auto.
DF Pstate selection is overridden vy the APB_DIS BIOS option if it is selected.
Options available: Auto, Enable, Disable. Default setting is Auto.
Options available: High Performace Mode, Efficiency Mode, Maximum IO
Performance Mode. Default setting is High Performace Mode.
Options available: Manual, Auto. Default setting is Auto.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Options available: Disabled, Enabled, Auto. Default setting is Disabled.
BIOS Setup
- 119 -