Table of Contents
Advertisement
CHAIR CONTROL FUNCTIONS (Cont'd)
Touchpad Back Control
Operating the Automatic Positions
The "0" and "1" buttons access programmable operating
positions, also shown below. The exit "0" position is pre-
programmed at the factory.
Programming the "1" Position
Adjust the chair to the desired position.
Press and hold the "Learn" button. The chair will
beep once to confirm. Continue holding the "Learn" button
while pressing the desired auto button "1" two times, then
listen for one quick beep to confirm the position has been
stored.
Return the chair to the "0" or exit position. Press the
"1" button and confirm the position has been correctly
programmed.
Programming the "0" Position
The exit or "0" position can be reprogrammed to the
desired position in the same manner as above.
12
Touchpad Location
Both Sides
0
1
31064 R00
Learn Button
(under Marus logo)
Position #1
(Press once to activate)
Position #2
(Press once to activate)
Chair Base Height
Adjustment Buttons
Backrest Incline
Adjustment Buttons
Advertisement
Table of Contents
