Positioning For Wheelchair Patients; Swing-Out Arm Rests - Marus Nustar 1700 SII Series Owner's Manual

CHAIR CONTROL FUNCTIONS (Cont'd)

Positioning for Wheelchair Patients

Your chair can easily be converted to accommodate
wheelchair patients. Remove the headrest by pulling upward
out of the chair back; reinstall the headrest in a reversed
position as shown. Loosen the adjustment knob and adjust
headrest into desired position.

Swing-Out Arm Rests

The arm rests can rotate outward and will set in either
of two positions (out at 63.5 degrees or back at 127
degrees). Simply push the toe end of the arm rest
outwards until it rotates to one the desired positions.
Pushing back towards the center of the chair will return
the arm rest to its original position. There is a rotation
stop in the arm to prevent the arm rest from rotating
inwards toward the patient.
WARNING: Use caution when using arm
rests as leverage when exiting the chair as
arms may rotate.
63.5°
31064 R00
63.5°
11