Toro Z Master Professional 500 Series Operator's Manual page 52

1. Clutch pulley
2. Mower belt
3. Spring-loaded idler pulley
4. Ratchet
10. Install the belt guide on the idler arm
11. Using the ratchet in the square hole, install the
idler spring (Figure
Note:
Make sure that the spring ends are
seated in the anchor grooves.
12. Install the belt covers
Figure 77
5. Square hole in the idler
arm for the ratchet
6. Idler-grease fitting
7. Belt guide
(Figure
77).
(Figure 78).
1. Position the belt cover
2. Slide the belt cover under
the side catches
g009038
77).
52
Figure 78
3. Ensure that the tab is
under the metal catch
g027730