Toro Z Master Professional 500 Series Operator's Manual page 39

6. Slowly pour approximately 80% of the specified
oil into the filler tube and slowly add the
additional oil to bring it to the Full mark
50).
Figure 50
7. Start the engine and drive to a flat area.
8. Check the oil level again.
Changing the Engine-Oil Filter
Service Interval: Every 200 hours—Change the
(Figure
1. Drain the oil from the engine; refer to
the Engine Oil (page
2. Change the engine-oil filter
g027660
Note:
the engine, and then turn the oil filter an extra
3/4 turn.
3. Fill the crankcase with the proper type of new
oil (Figure
39
engine-oil filter (more often in dirty
or dusty conditions).
38).
(Figure
Figure 51
Ensure that the oil-filter gasket touches
47).
Changing
51).
g027477