Advertisement
Startup
1. Power on. Turn the mains switch to on ( I ).
- Start up sequence starts. Backlight of the Power on/off button flashes WHITE.
- When start up sequence is finalized the Power on/off button lit WHITE.
2. Press the Power on/off button.
- The backlight of the Power on/off button changes from WHITE to BLUE.
- Local LCD displays a start up screen.
1
Adjust
1. Adjust the lens settings by pressing the LENS button or via the direct lens keys on the RCU.
Select the "Greenfocus" test pattern to adjust the lens.
TIP: Press star button (*)
to activate test pattern
2. Orientation of the unit is set as standard in table front projection mode.
Change the projector set up in the ALIGNMENT > ORIENTATION menu.
3. For Advanced adustments like Warping, Light management, etc. see User Guide of the projector.
Connect and Select source
1. Connect available sources to the appropriate input ports.
2. Select connected source: Image of selected input appears.
- The LED of the selected source lit up GREEN.
- The yellow LED indicates if sync/signal is present.
1 1
- 2 -
2
2
Advertisement
