Inserting Accessories - Siemens HB876G8B6 Instruction Manual

--------
Only use original accessories. They are specially
adapted for your appliance.
You can buy accessories from the after-sales service,
from specialist retailers or online.
The accessories may deform when they become
Note:
hot. This does not affect their function. Once they have
cooled down again, they regain their original shape.

Inserting accessories

The cooking compartment has five shelf positions. The
shelf positions are counted from the bottom up.
In some appliances, the highest shelf position is
marked on the cooking compartment with the grill
symbol.
When using shelf positions 4 and 5, always insert the
accessory between the two guide bars for the shelf
position.
Accessories can be pulled out approximately halfway
without tipping. With the pull-out rails at levels 1, 2 and
3, you can pull the accessories out further.
Make sure that the accessory is placed behind the lug
on the pull-out rail.
‚
Example in the picture: Universal pan
The pull-out rails lock in place when they are fully pulled
out. This makes it easy to place the accessories in
position. To unlock, push the pull-out rails back into the
cooking compartment with a certain amount of force.
Baking tray
For tray bakes and small baked prod-
ucts.
Meat thermometer
Enables precision roasting to your exact
requirements.
Its use is described in the relevant sec-
tion. ~ "Meat thermometer"
on page 17
Notes
Make sure that you always insert the accessories
■
into the cooking compartment the right way round.
Always insert accessories fully into the cooking
■
compartment so that they do not touch the appliance
door.
Locking function
The accessories can be pulled out approximately
halfway until they lock in place. The locking function
prevents the accessories from tilting when they are
pulled out. The accessories must be inserted into the
cooking compartment correctly for the tilt protection to
work properly.
When inserting the wire rack, ensure that lug
rear and is facing downwards. The open side must be
facing the appliance door and the outer rail must be
facing downwards .
¾
When inserting baking trays, make sure that the recess
is at the rear and is facing downwards. The sloping
‚
edge of the accessory
appliance door.
Example in the picture: Universal pan
Combining accessories
You can insert the wire rack and the universal pan at
the same time to catch drops of liquid.
When inserting the wire rack, ensure that both spacers
are at the rear edge. When inserting the universal
‚
pan, the wire rack is on top of the upper guide rod of
the shelf position.
Accessories
‚
must be facing towards the
ƒ
en
is at the
11