Listening To A Cd Or Mp3/Wma Disc; Listening To The Ipod, Iphone Or Ipad - Sharp DK-KP80PH Operation Manual

Listening to the iPod, iPhone or iPad

(continued)
■ To disconnect iPod, iPhone or iPad
Simply remove the iPod or iPhone from the docking station
or iPad connector from USB terminal. It is safe to do so
even during playback.
Caution:
● Unplug all accessories for the iPod or iPhone before
inserting it into the docking station.
● Stop button ( ) at main unit is invalid during iPod
function.
■ Various iPod, iPhone and iPad functions
Function Main unit Remote control
Dock/USB Dock
Play
Pause
Track up/
down
Fast
forward/
reverse
____
Repeat
Shuffle
____
Menu
____
Enter
____
Cursor
Up/Down
Operation
USB
Press in the pause
mode.
Press in the
playback mode.
Press in the
playback or pause
mode.
If you press the
button in the pause
mode, press the /
button to start the
desired track.
Press and hold
down in the
playback mode.
Release the button
to resume
playback.
Press to toggle
repeat mode.
Press and hold
to toggle shuffle
mode.
Press to view the
iPod menu during
iPod function.
Press to confirm
the selection.
Press to select the
iPod menu.
E-9

Listening to a CD or MP3/WMA disc

This system can play back a standard CD, CD-R/RW in the CD
format and CD-R/RW with MP3 or WMA files, but cannot record
on them. Some audio CD-R and CD-RW discs may not be
playable due to the state of the disc or the device that was used
for recording.
MP3:
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3. MP3 is a type of audio code which
is processed by significant compression from the original
audio source with very little loss in sound quality.
● This system supports MPEG 1 Layer 3 and VBR files.
● During VBR file playback, time counter in the display may
differ from its actual playback time.
● Bitrate which is supported by MP3 is 32 ~ 320 kbps.
WMA:
WMA files are Advanced System Format files that include
audio files which are compressed with Windows Media
Audio codec. WMA is developed by Microsoft as an audio
format file for Windows Media Player.
● "MP3" and "WMA" indicator will light up after the unit reads
information on an MP3 or WMA disc.
● Bitrate which is supported by WMA is 64 ~ 160 kbps.
■ Disc playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button on the remote control or FUNCTION
button repeatedly on the main unit to select CD function.
3
Press the OPEN/CLOSE button to open the disc compartment.
4
Place the disc in the disc compartment, label side front.