Fujitsu PRIMERGY RX2520 M1 Operating Manual page 17

– If a failure occurs, please inform your service about the TPM
activation before it takes any action, and be prepared to provide them
with your backup copies of the TPM content.
Slots for expansion cards
The server can be flexibly expanded via seven slots (six PCIe Gen3 x8 and one
PCIe Gen2 x4).
One of these slots (slot 7) is occupied with one of two possible SAS/SATA RAID
controllers.
Hard disk drives
The server is available in the following drive configurations:
8*3.5-inch SAS/SATA hard disk drives or SAS/SATA SSD connected to
●
SAS/SATA onboard:
up to eight HDD modules, each with a 3.5-inch SAS/SATA hard disk drive
with a maximum height of 1 inch. Slot for an optional 3.5-inch ODD drive.
12*3.5-inch SAS/SATA hard disk drives or SAS/SATA SSD connected to
●
SAS/SATA onboard:
up to twelve HDD modules, each with a 3.5-inch SAS/SATA hard disk drive
with a maximum height of 1 inch.
4*2.5-inch SAS/SATA hard disk drives or SAS/SATA SSD connected to
●
SAS/SATA onboard:
up to four HDD modules, each with a 2.5-inch SAS/SATA hard disk drive with
a maximum height of 15 mm.
4*2.5-inch SAS/SATA hard disk drives or SAS/SATA SSD connected to
●
SAS/SATA onboard:
up to four HDD modules, each with a 2.5-inch SAS/SATA hard disk drive with
a maximum height of 15 mm.
4*2.5-inch SAS/SATA hard disk drives or SAS/SATA SSD connected to
●
RAID controller:
up to four HDD modules, each with a 2.5-inch SAS/SATA hard disk drive with
a maximum height of 15 mm.
4*2.5-inch SAS/SATA hard disk drives or SAS/SATA SSD + LTO drive (only
●
with RAID controller):
up to four HDD modules, each with a 2.5-inch SAS/SATA hard disk drive or
SAS/SATA SSD with a maximum height of 15 mm, and a 5.25-inch LTO
drive.
RX2520 M1
Operating Manual
Functional overview
17