Garland HUNTER 765 SB Instruction Manual page 35

lawnmower to mulch, to cut brush or bushes, and do
not use it as a mill. Using the mower for other than
the envisaged operations may result in dangerous
situations.
Use only machine accessories, tooling, etc. in
accordance with these instructions and as intended,
taking into account the working conditions and the
taking into account the working conditions and the
work to develop. The use of this mower for uses
other than the designated operations may result in
dangerous situations.
Check that all the safety devices are installed and in
good condition.
Remember that the machine operator is responsible
for the dangers and accidents caused to other people
or things. The manufacturer will not be in any way
liable for damages caused by improper or incorrect
use of this machine.
The cutting tool is very sharp. Not following the
instructions may cause severe damage.
Keep your body away from the cutting tool while
using the machine.
Do not force this machine. Use this machine to the
correct application. Using the machine for the type of
work meant to be done will allow you to work better
and more safely.
Do not use this machine if the switch does not
change between "open" and "closed". Any machine
that cannot be controlled with the switch is
dangerous and must be repaired.
Before starting work with the machine, check that the
milling tools are not in contact with any object and
that they can move freely.
Do not use the machine on steep slopes where your
safety cannot be guaranteed. If you are working on
slopes slow down your work pace and ensure you
have a good stability.
Keep this machine maintained and in proper
condition. Check that the moving parts are not
misaligned or locked, that there are no broken parts
or other conditions that may affect the operation of
this machine.
Whenever this machine is damaged, repair it before
use. Many accidents are caused by poorly maintained
machines.
Keep the machine handles dry and clean. Greasy or
oily handles are slippery and cause loss of control
over the machine.
After hitting any object inspect the mower for
possible damage. If the blade is bent, some casing
is broken, or if you see any other problems that may
affect the operation of the machine do the necessary
repairs or take your unit to the technical service.
Turn off the machine, disconnect the spark plug and
make sure that the cutting tool is stopped before
making any adjustments, filling with fuel, changing
accessories, cleaning, transportation and storage
of this machine. Such preventive safety measures
reduce the risk of accidental starting of this machine.
If the machine starts to vibrate in a strange way, turn
it off and examine it to find the cause. If you cannot
35/176
English