Advertisement
SITUATE AND CONNECT YOUR
2
2
NEW VCR
a–BASIC ANTENNA/CABLE CONNECTION
1
5
Place the VCR on a stable, horizontal
After completing the basic connections:
surface.
● If you're using a Cable Box, . . .
2
Disconnect your antenna or cable line
. . . go to 2b (CATV CONVERTER
from your TV.
3
Connect your antenna to your VCR.
● If you're using an AV connection, . . .
4
Connect your VCR to your TV.
. . . go to 2c (AUDIO/VIDEO
● If you're using an RF connection only, . . .
. . . go directly to 3 (PLUG & PLAY).
RF CONNECTION
Back of VCR (example only)
COMBINED VHF/UHF
ANT. IN
RF OUT
SEPARATE VHF/UHF
VHF ONLY
UHF ONLY
CABLE TV LINE
Note:
Exact connector positions and names may differ.
● CONNECTORS WHICH ARE OR MAY BE REQUIRED:
RF Cable
300-75 ohm Matching
Transformer
Antenna Splitter
Antenna Splitter
Downloaded from:
https://www.usersmanualguide.com/
b–CATV CONVERTER CONNECTION
OUT
IN
From
Cable
Box
CONNECTION) .
With this connection you can view/record any
cable channel including scrambled channels to
which you have subscribed.
CONNECTIONS).
To watch TV with this type of connection
1
Press TV/VCR on the Remote so that the VCR
mode indicator lights on the front display
panel.
2
Tune TV to VCR output channel
Back of TV (example only)
(3, 4 or AV mode).
3
Tune VCR to Cable Box output channel.
4
Select desired channel on Cable Box.
•You can only view the channel you are
VHF/UHF
recording.
c–AUDIO/VIDEO CONNECTIONS
VHF
UHF
AV connection methods differ from one type
of VCR to another. First, for any TV and VCR,
connect your VCR to your TV using RF
connection. Then make AV connections
VHF
following one of the methods illustrated here.
UHF
After making the connections, go to 3
& PLAY)
.
MONAURAL VHS VCR
VHF/UHF Antenna Mixer
VIDEO OUT
AUDIO OUT
To Listen To VCR Sound Through A
Component Stereo Audio System,
Connect As Shown
CATV Input
Cable
To TV
Box
TV
VCR
TV
ANT. IN
RF OUT
To TV
VCR
With this connection, you can view one
scrambled cable channel while recording
another unscrambled channel.
To watch TV with this type of connection
1
Press CH 5∞ (+/–) or Number keys to select
desired channel for recording.
2
Press TV/VCR so that the VCR mode indicator
goes off from the front display panel.
3
Tune TV to Cable Box output channel.
4
Select desired channel on Cable Box.
• You cannot record scrambled channels.
• To play back a tape, you must tune the
Cable Box to the VCR output channel.
Hi-Fi VHS VCR
AV STEREO TV
VIDEO OUT
(PLUG
L
AUDIO OUT
R
SUPER VHS VCR
AV STEREO TV WITH S-VIDEO
AV TV
INPUT TERMINALS
S-VIDEO OUT
VIDEO IN
VIDEO OUT
AUDIO IN
L
AUDIO OUT
R
Monaural deck owners:
VCR
Connect to VCR's AUDIO
OUT
VIDEO OUT
L
AUDIO OUT
R
SET YOUR VCR'S CLOCK AND
3
3
TUNER
CATV Input
PLUG & PLAY
ANT. IN
RF OUT
The VCR's clock and tuner channels are set automatically when the VCR is plugged into the AC
From VCR
outlet.
Cable
OUT
IN
If you use a cable box, Plug & Play will not function; set the clock and tuner channels separately.
Box
(
pg.10 – 14 of the HR-VP782U's instruction manual)
1
Plug the VCR into the
AC outlet.
2
Do not press any buttons on the VCR or on the
Remote during Auto Setup.
3
VIDEO IN
L
AUDIO IN
R
"AUTO" blinks while the VCR automatically
sets the clock using information provided by
the local PBS channel.
NOTES:
S-VIDEO IN
● If the clock time displayed in
VIDEO IN
L
procedure (refer to page 11 or 12 of the HR-VP782U's instruction manual). Auto Channel Set
AUDIO IN
R
has already taken place, and is not affected.
● There are some PBS channels that do not transmit clock setting data. If your antenna cable is
properly connected and "– – : – –" is displayed, perform the Manual Clock Set procedure (refer
TV
to page 12 of the HR-VP782U's instruction manual). Auto channel setting has not yet taken
place, so perform the Auto Channel Set procedure (refer to page 13 of the HR-VP782U's
instruction manual).
AMP
4
During Auto Channel Set, the channel numbers
are displayed as they are scanned and set.
Receivable channels are automatically stored
in memory in the order of their frequencies,
and non-receivable channels are skipped.
5
When setting is complete, the VCR displays the
current clock time. You can now use your
VCR.
5
is incorrect, perform the Semiauto or Manual Clock Set
Advertisement
