Starting A Pistol Session - Garmin XERO C1 Owner's Manual

Starting a Pistol Session

Always ensure you position the chronograph so that it is not directly exposed to ejecting cartridge cases,
muzzle blast, or other hazards that may damage the chronograph.
1 Select NEW SESSION > PISTOL.
2 Select a velocity range.
3 If you have enabled the PROJECTILE WEIGHT ENTRY setting
• To calculate the kinetic energy and power factor of your bullet, select YES, and enter the weight of your
bullet.
• To continue without calculating kinetic energy and power factor, select SKIP.
4 If necessary, observe the alignment diagram and press OK to continue.
5 Point the chronograph at the target with the screen facing you.
6 Hold the pistol over the chronograph so the barrel is positioned 15 to 35 cm (5 to 15 in.) above the
chronograph .
The device detects shots and displays measurements automatically as you shoot.
Recording Shot Data
NOTICE
(Pro Settings, page 11), select an option:
5