keilhauer Symm Metal Table Assembly Instructions

Symm Metal Table
Assembly Instructions
1
Using the 1/8" hex key, fasten the glide (x4) to the
metalleg using the 10-24 x 1/2" button head cap
screw (x4).
3
Using the 1/8" hex key, fasten the wood leg sub
assembly to the aluminum extrusion with the 1/4" set
screw (x16).
5
Using the 5/32" hex key, fasten the base sub
assembly to the table top with with 1/4-20 x 5/8"
button head cap screw (x4) and flat washer (x4).
Hardware Included
1/4"
1/4-20 x 5/8"
Button head cap Flat washer
screw (x4)
(x4)
2
Using the 1/8" hex key, fasten the table mount to the
metal leg with the 10-24 flat head machine screw
(x12).
4
Place the table top upside down on a blanket.
6
Proceed to flip the table and place into its final
position.
1
Glide 10-24 Flat head 10-24 x 1/2"
machine screw
(x4) Button head cap
(x12)
screw (x4)
Tools Required
1/8" Hex Allen Key
5/32" Hex Allen Key
1/4" Set Screw
(x16)