Condensate Drain Connection - Ferroli BLUEHELIX TECH RRT 30 H Instructions For Use & Installation

BLUEHELIX TECH RRT 30 H

2.7 Condensate drain connection

IMPORTANT
The boiler has an internal trap for draining condensate. Install the hose "B" by pressing it into place. Before commis-
sioning, fill the trap with approx. 0.5 L of water and connect the hose to the disposal system.
B
ATTENTION: THE UNIT MUST NEVER BE OPERATED WITH THE TRAP EMPTY!
OTHERWISE THERE IS A DANGER OF SUFFOCATION DUE TO THE EMISSION OF THE COMBUSTION
FUMES.
EN
0,5lt
B
fig. 29- Condensate drain connection
cod. 3541C670 - Rev. 00 - 05/2018
173