Beko 01M-8913603200-1123-04 User Manual page 34

5
Cleaning
3. Press Hot Water button, the button illuminates only.
4. The machine dispenses hot water. Touch and hold the button; release the
button when it reaches your desired volume. Dispensing stops now and the
volume is now stored
The Latte/Cappuccino/Coffee/Hot water button is programmed: every time it' s
pressed, the machine will brew the same amount set.
Cancelling the auto-clean mode
Your appliance cleans itself automatically before and after each brewing
operation. You may follow the steps below to cancel the auto-clean mode.
• Turn on the appliance by pressing the On-Off switch and wait until it
engages the Stand-by position.
• Open the service cover.
• Press the On-Off switch for 5 seconds, a beep shall be heard.
• Close the service cover.
• Now, the auto-clean operation is cancelled.
We recommend you to use the auto-clean mode actively for a
healthy operation.
34 / EN
Fully Automatic Coffee Machine / User Manual