Beko 7001440006 User Manual page 24

4.3.12 Changing the selections after programme has started
Adding laundry after the programme has started
If the water level in the machine is suitable when you press Start/Pause button, the door lock will be
deactivated and the door will open, allowing you to add garments. The door lock icon on the display goes off
when the door lock is deactivated. After adding garments, close the door and press Start/Pause button once
again to resume the washing cycle.
If the water level in the machine is not suitable when you press Start/Pause button, the door lock
cannot be deactivated and the door lock icon on the display remains on.
C
If the temperature of the water inside the machine is above 50°C, you cannot deactivate the door lock for safety reasons,
even if the water level is suitable.
Switching the machine to pause mode:
Press the Start/Pause button to switch the machine to pause mode. Pause symbol will flash on the display.
Changing the programme selection after programme has started:
The programme change is allowed when the current programme is running unless the Child Lock is enabled.
This action will cancel the current programme.
24 / EN
•
Open the pump filter cap.
•
Release the loading door emergency handle located at the rear side of
the filter cap.
•
Pull down the loading door emergency handle once and open the loading
door. After opening the loading door, re-insert the loading door emergency
handle.
•
If the loading door does not open, try again by pulling down the handle.
:
Washing Machine / User's Manual