Smeg SU45MCX1 Instructions For Use Manual page 23

USA
The following table shows the defrosting by weight function programmes,
indicating weight intervals, and defrosting and standing times (in order to
ensure the food is of a uniform temperature).
PROGRAMME
PR 01
PR 02
PR 03
PR 04
PR 05
11.4.10 Pizza function
After selecting this function press PT1 to set the parameters and the
duration light
Turn PT1 to the right or left to change the preset Pizza weight.
Press PT2 to start the cooking process.
11.4.11 Delayed Start Time (Automatic cooking)
When PT1 is pressed to define a delayed start time the corresponding
light starts to blink, DSP1 shows the current time and DSP 2 shows
"Auto".
Turn PT1 to the right or left to change the delayed start time.
Press PT2 to validate the delayed start time.
The oven enters in an idle state waiting for the defined start time. DSP3
shows the selected function and DSP1 and DSP2 show all the defined
parameters for the function continuously alternating.
If you wish to start the function before the selected time, just press PT2.
If you wish to cancel the programming, press PT2 for 3 seconds.
11.5 When the oven is working...
11.5.1 Interrupting a cooking cycle
You can stop the cooking process at any time by pressing the Start/Stop
key once or by opening the oven door. In both cases:



If you wish, at this time you can:



To restart the process, close the door and press PT2.
11.5.2 Modifying parameters
The operating parameters (time, weight, power, etc.) can only be modified
when the cooking process has been interrupted. Proceed as follows:

Instructions for the User
FOOD WEIGHT (oz)
3,5 – 70,5
MEAT
POULTRY
FISH
FRUIT
BREAD
starts to blink. The weight light
Microwave emission is stopped immediately.
The grill is de-activated but is still very hot. Danger of
burning!
The timer stops and the display shows the remaining amount of
operating time.
Turn or stir the food to ensure it will be evenly cooked.
Modify the process parameters.
Cancel the process by pressing PT2 for 3 seconds.
Turn PT2 to the right or left to change the function.
TIME (MIN)
2 – 43
3,5 – 88 2 – 58
3,5 – 88 2 – 40
3,5 – 18 2 – 13
3,5 – 28 2 – 19
STANDING
TIME (MIN)
20 – 30
20 – 30
20 – 30
10 – 20
10 – 20
starts to blink.
21