MOTOR ASSEMBLY
Fit crown by sliding along the motor body until it meets the
motor head.
Fit the drive using the cir-clip to secure in position.
Attach the motor plate with the screws supplied in either left
hand or right hand orientation as required.
KEY FEATURES
DC power supply with energy saving patented design, 7.4V
2600mAh (R1912) 3000mAh (R1918) Lithium battery built-in.
Setting limits by remote control. Up to 6 limits, including
upper/lower limit and 4 intermediate positions.
433.92MHz radio control.
Short/open circuit protection
Patented helical gear design, noise level lowered to 30dB.
REMOTE LAYOUT
LED CHANNEL
INDICATOR
UP
STOP
DOWN
R 1 9 1 2 & R 1 9 1 8 L I T H I U M M O T O R
Operating Instructions
LED CHANNEL
INDICATOR
CHANNEL
BUTTON
R1940 - 1CH
Push button
ATTACHING THE SOLAR PANEL
Make sure the motor has enough charge to operate the blind.
Attach the solar panel to the charge port on the motor using the
1.5m charge cable.
Place/ fix the solar panel so that it is facing direct sunlight.
POWER SOURCE & CHARGING OPTIONS
Built-in Li-ion battery supply. Recharged using an external charger. On
a full charge can be used up to 6 months. Charging time is 6-8 hours.
UP
STOP
DOWN
R1942 - 6CH - WH
Push button
Also available in black
LED CHANNEL
INDICATOR
UP
STOP
DOWN
CHANNEL
BUTTON
R1944 - 16CH
Push button