Setting Up - LG HW904TA-AHP Manual

HW904PA-AHP_BHKGLLK_ENG_0777

Setting up

The speakers are detached from the speaker stands.
a a
Assembling the Speakers (HW904TA, HW904PA)
1 Attach the speakers to the speaker stands by rotating the screw.
2 If you want to arrange the speaker cable, draw the speaker cable
through the hole on the speaker.
3 Connect the speaker cable.
Attaching the speakers to the DVD receiver
a a
You will have received four speaker cables.
Each one is colour-coded by a band near each end and connects one of
the four speakers to the DVD receiver.
4
3/25/09 9:36 PM Page 4
b b c c
b b
Connect the wires to the DVD receiver.
Match each wire's coloured band to the same coloured connection
terminal on the rear of the DVD receiver. To connect the cable to the DVD
receiver, press each plastic finger pad to open the connection terminal.
Insert the wire and release the finger pad.
Connect the black end of each wire to the
terminals marked -(minus) and the other end
to the terminals marked + (plus).
c c
Connect the wires to the speakers.
Connect the other end of each wire to the correct speaker according to
:
the colour coding
Main Unit SPEAKER
In front of you, to the right of the
FRONT R Red
screen.
CENTER Green Above screen, directly in front of you.
This can be placed in any front position.
SUB WOOFER
Orange
In front of you, to the left of the
FRONT L White
screen.
To connect the cable to the speakers, press each plastic finger pad to open the
connection terminals on the base of each speaker. Insert the wire and release
the finger pad.
POSITION