Setting Up - LG HW964TZ-AMP User Manual

HW964TZ-AMP_DCHNLL_ENG_5808

Setting up

The speakers are detached from the speaker stands.
d d
b b
c c
a a
Assembling the Speakers
1 Fix the post to the base by rotating the post.
2 Draw the connector cable through the hole on the stand.
3 Fix the speaker to the stand by rotating the speaker.
4 Connect the connector cable between the speaker and base.
5 Connect the speaker cord to the appropriate terminals on the
speaker.
Attaching the speakers to the DVD receiver
a a
You will have received four speaker cables.
Each one is colour-coded by a band near each end and connects one of
the four speakers to the DVD receiver.
4
7/24/09 11:17 AM Page 4
e e
b b
Connect the wires to the DVD receiver.
Match each wire's coloured band to the same coloured connection
terminal on the rear of the DVD receiver. To connect the cable to the DVD
receiver, press each plastic finger pad to open the connection terminal.
Insert the wire and release the finger pad.
Connect the black end of each wire to the
terminals marked -(minus) and the other end
to the terminals marked + (plus).
c c
Connect the wires to the speakers.
Connect the other end of each wire to the correct speaker according to
:
the colour coding
Main Unit SPEAKER
FRONT R Red In front of you, to the right of the screen.
CENTER Green Above screen, directly in front of you.
SUB WOOFER This can be placed in any front position.
Orange
In front of you, to the left of the screen.
FRONT L White
To connect the cable to the speakers, press each plastic finger pad to open the
connection terminals on the base of each speaker. Insert the wire and release
the finger pad.
Be careful of the following
• Be careful to make sure children do not put their hands or any objects into
the *speaker duct.
*Speaker duct: A hall for plentiful bass sound on speaker cabinet(enclosure).
• Use the rear speaker at least 30 CM away from either TV screen or PC
monitor.
POSITION