Samsung AC TN4PKC Series Instruction Manual page 21

6 Press the (Mode) button. Fan and On appear on the remote control display.
7 Set the SEG9 and SEG10 values:
a Set the SEG9 value by rotating the Wheel
counterclockwise until the value you want to set
appears on the remote control display.
b Set the SEG10 value by rotating the Wheel clockwise
until the value you want to set appears on the remote
control display.
When you rotate the Wheel, values appear in the following order:
8 Press the (Mode) button. Heat and On appear on the remote control display.
9 Set the SEG11 and SEG12 values:
a Set the SEG11 value by rotating the Wheel
counterclockwise until the value you want to set
appears on the remote control display.
b Set the SEG12 value by rotating the Wheel clockwise
until the value you want to set appears on the remote
control display.
When you rotate the Wheel, values appear in the following order:
10 Press the (Mode) button. Auto and Off appear on the remote control display.
11 Set the SEG14 and SEG15 values:
a Set the SEG14 value by rotating the Wheel
counterclockwise until the value you want to set
appears on the remote control display.
Steps Remote control display
SEG9
SEG10
SEG11
SEG12
SEG14
21
English